Spa Flush

Spa Flush

from Water Trends™

Great Price: $18.99

Sale Price: $10.99

Estimate Shipping Cost To: 


Inside every spa and hot tub, there are several areas where a build-up of contaminants accumulates. These areas of build-up can potentially lead to cloudiness, orors, foaming, and a increase in consumption of sanitizing chemicals. Spa Flush will lift those accumulations so they may be removed when the spa water is drained and the surfaces are cleaned. 

  • Great for restoring hot tub plumbing to its original condition. 
  • Removes contaminant accumulations in side yoru spa's plumbing system. 
  • Use before draining to clean where you can't see. 

SKU 3078

Shipping Icon

Free shipping over $50

  1. Make sure hot tub or spa is heated above 90 degrees.
  2. Remove filters, with the spa jets turned off, apply entire contents (16oz) of the product directly to the spa. It treats up to 750 gallons of water. 
  3. Turn on the spa jet motor on the highest setting for 5 to 10 minutes. 
  4. Let spa operate as normal for at least 8 hours afterwards but no longer than 48 hours. (Do Not Use The Spa During Treatment!)
  5. Prior to draining the spa, turn on the jets at the highest setting. Drain the spa as you would normally do. 
  6. Once empty, clean spa surfaces. Rinse and degrease spa filters using a cleaning solution (Cartridge Clean & Renew). The hot tub should be filled immediately afterwards.